R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

Figure 2 Network diagram

Configuration procedure

1. Configure Router to send syslog messages to Host B (see Network Management and Monitoring

Configuration Guide).

2. Enable MAC Information.

# Enable MAC Information globally.

<Router> system-view

[Router] mac-address information enable

# Configure MAC Information mode as syslog.

[Router] mac-address information mode syslog

# Enable MAC Information on GigabitEthernet 4/0/1.

[Router] interface GigabitEthernet 4/0/1

[Router-GigabitEthernet4/0/1] mac-address information enable added

[Router-GigabitEthernet4/0/1] mac-address information enable deleted

[Router-GigabitEthernet4/0/1] quit

# Set the MAC Information queue length to 100.

[Router] mac-address information queue-length 100

# Set the MAC change sending interval to 20 seconds.

[Router] mac-address information interval 20

Host A

192.168.1.1/24

Host B

192.168.1.2/24

Server

192.168.1.3/24

Router

GE4/0/1

GE4/0/3

GE4/0/2