R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

190
Ste
p
Command Remarks
2. Configure one class for a
foreign CVLAN and SVLAN
pair.
a. Create a class and enter
class view:
traffic classifier tcl-name
[ operator and ]
b. Specify a foreign CVLAN
as a match criterion:
if-match customer-vlan-id
vlan-id
c. Specify a foreign SVLAN
as a match criterion:
if-match service-vlan-id
vlan-id
d. Return to system view:
quit
Repeat this step to create one class
for each foreign CVLAN and
SVLAN pair.
3. Configure one SVLAN
marking action for a CVLAN
and SVLAN pair.
a. Create a traffic behavior
and enter traffic behavior
view:
traffic behavior
behavior-name
b. Configure an SVLAN
marking action to replace
the foreign SVLAN ID with
a local SVLAN ID:
remark service-vlan-id
vlan-id
c. Return to system view:
quit
Repeat this step to configure one
SVLAN marking action for each
CVLAN and SVLAN pair.
4. Create a QoS policy and
enter QoS policy view.
qos policy policy-name N/A
5. Associate the class with the
behavior.
classifier tcl-name behavior
behavior-name
Repeat this step to create other
class-behavior associations.
Configuring an uplink policy for the network-side port
The uplink policy on the network-side port modifies the CVLAN ID of incoming traffic.
To configure an uplink policy for the network-side port:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A