R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

191
Ste
p
Command Remarks
2. Create one class for a local
SVLAN and foreign CVLAN
pair.
a. Create a class and enter
class view:
traffic classifier tcl-name
[ operator and ]
b. Specify a foreign CVLAN
as a match criterion:
if-match customer-vlan-id
vlan-id
c. Specify a local SVLAN as
a match criterion:
if-match service-vlan-id
vlan-id
d. Return to system view:
quit
Repeat this step to create one class
for each local SVLAN and foreign
CVLAN pair.
3. Configure one CVLAN
marking action for a local
SVLAN and foreign CVLAN
pair.
a. Create a traffic behavior
and enter traffic behavior
view:
traffic behavior
behavior-name
b. Configure a CVLAN
marking action to replace
the foreign CVLAN ID with
a local CVLAN ID:
remark customer-vlan-id
vlan-id
c. Return to system view:
quit
Repeat this step to configure one
CVLAN marking action for each
local SVLAN and foreign CVLAN
pair.
4. Create a QoS policy and
enter QoS policy view.
qos policy policy-name N/A
5. Associate the class with the
behavior.
classifier tcl-name behavior
behavior-name
Repeat this step to create other
class-behavior associations.
Configuring a downlink policy for the customer-side port
The downlink policy on the customer-side port replaces local SVLAN and CVLAN pairs with foreign
SVLAN and CVLAN pairs.
To configure a downlink policy for the customer-side port:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A