R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

192
Ste
p
Command Remarks
2. Create one class for a local
CVLAN and SVLAN pair.
a. Create a class and enter
class view:
traffic classifier tcl-name
[ operator and ]
b. Specify a local CVLAN as
a match criterion:
if-match customer-vlan-id
vlan-id
c. Specify a local SVLAN as
a match criterion:
if-match service-vlan-id
vlan-id
d. Return to system view:
quit
Repeat this step to create one class
for each local CVLAN and SVLAN
pair.
3. Create one VLAN marking
behavior for a local CVLAN
and SVLAN pair.
a. Create a traffic behavior
and enter traffic behavior
view:
traffic behavior
behavior-name
b. Configure a CVLAN
marking action to replace
the local CVLAN ID with a
foreign CVLAN ID:
remark customer-vlan-id
vlan-id
c. Configure an SVLAN
marking action to replace
the local SVLAN ID with a
foreign SVLAN ID:
remark service-vlan-id
vlan-id
d. Return to system view:
quit
Repeat this step to create one
VLAN marking behavior for each
local CVLAN and SVLAN pair.
4. Create a QoS policy and
enter QoS policy view.
qos policy policy-name N/A
5. Associate the class with the
behavior.
classifier tcl-name behavior
behavior-name
Repeat this step to create other
class-behavior associations.
Configuring the customer-side port
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A