R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

212
Step Command Remarks
4. Configure the advertisable
TLVs in Layer 3 Ethernet
interface view.
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name } |
dot3-tlv { all | link-aggregation | mac-physic
| max-frame-size | power } | med-tlv { all |
capability | inventory | location-id
{ civic-address device-type country-code
{ ca-type ca-value }&<1-10> | elin-address
tel-number } | power-over-ethernet } }
Optional.
By default, all types of
LLDP TLVs, except the IEEE
802.1 organizationally
specific TLVs, network
policy TLVs, and location
identification TLVs, are
advertisable on a Layer 3
Ethernet port.
Configuring the management address and its encoding format
LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encodes its
management address in character string format, you must configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
To configure a management address to be advertised and its encoding format on a port or group of
ports:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter Ethernet interface view
or port group view.
• Enter Layer 2/Layer 3 Ethernet
interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
Use either command.
3. Allow LLDP to advertise the
management address in
LLDPDUs and configure the
advertised management
address.
lldp management-address-tlv
[ ip-address ]
Optional.
By default, the management
address is sent through LLDPDUs.
• For a Layer 2 Ethernet port, the
management address is the
main IP address of the lowest-ID
VLAN carried on the port. If
none of the carried VLANs is
assigned an IP address, no
management address will be
advertised.
• For a Layer 3 Ethernet port, the
management address is its own
IP address. If no IP address is
configured for the Layer 3
Ethernet port, no management
address will be advertised.