R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

21
Figure 6 Local-first link-aggregation load sharing
To enable local-first load sharing for link aggregation:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enable local-first load-sharing
for link aggregation.
link-aggregation load-sharing
mode local-first
Optional.
By default, the function is enabled.
Displaying and maintaining Ethernet link
aggregation
Task Command Remarks
Display information about
aggregate interfaces.
display interface [ bridge-aggregation |
route-aggregation ] [ brief [ down ] ] [ | { begin
| exclude | include } regular-expression ]
display interface { bridge-aggregation |
route-aggregation } interface-number [ brief
[ description ] ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display the local system ID.
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display the global or
group-specific link-aggregation
load-sharing criteria.
display link-aggregation load-sharing mode
[ interface [ { bridge-aggregation |
route-aggregation } interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.