R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

96
Syntax
ppp lcp imsi request
undo ppp lcp imsi request
Default
The LNS side does not initiate an IMSI negotiation request.
Views
VT interface view
Default command level
2: System level
Examples
# Configure the LNS side to initiate an IMSI negotiation request.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp lcp imsi request
ppp lcp imsi string
Use ppp lcp imsi string to configure IMSI information for the client.
Use undo ppp lcp imsi string to remove IMSI information from the client.
Syntax
ppp lcp imsi string imsi-info
undo ppp lcp imsi string
Default
IMSI information is automatically obtained from the client.
Views
VT interface view
Default command level
2: System level
Parameters
string imsi-info: Configures IMSI information for the client, a case-sensitive string of 1 to 31 characters.
Examples
# Configure IMSI information as imsi1 for the client.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1]ppp lcp imsi string imsi1
ppp lcp sn accept
Use ppp lcp sn accept to configure the client side to accept LNS-initiated serial number (SN) negotiation
requests.