R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

98
Syntax
ppp lcp sn string sn-info
undo ppp lcp sn string
Default
SN information is automatically obtained from the client.
Views
VT interface view
Default command level
2: System level
Parameters
string sn-info: Configures SN information for the client, a case-sensitive string of 1 to 31 characters.
Examples
# Configure SN information as sn1 for the client.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1]ppp lcp sn string sn1
ppp user accept-format imsi-sn split
Use ppp user accept-format imsi-sn split to configure a separator for splitting the peer username used for
authentication.
Use undo ppp user accept-format to restore the default.
Syntax
ppp user accept-format imsi-sn split splitchart
undo ppp user accept-format
Default
No separator is configured.
Views
VT interface view
Default command level
2: System level
Parameters
splitchart: Specifies a separator for splitting the peer username used for authentication. The separator is
one character in length and can be a letter, number, or signs such as percent sign (%), pound sign (#),
and at sign (@).
Usage guidelines
If IMSI/SN information fails to be negotiated, the split IMSI/SN information is used.
Examples
# Configure the separator for splitting the peer username as #.