R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

99
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1]ppp user accept-format imsi-sn split #
ppp user attach-format imsi-sn split
Use ppp user attach-format imsi-sn split to configure a separator for the username sent for authentication
during negotiation.
Use undo ppp user attach-format to remove the configured separator.
Syntax
ppp user attach-format imsi-sn split splitchart
undo ppp user attach-format
Default
No separator is configured.
Views
VT interface view
Default command level
2: System level
Parameters
splitchart: Specifies a separator for the username sent for authentication during negotiation. The
separator is one character in length and can be a letter, number, or signs such as percent sign (%),
pound sign (#), and at sign (@). For example, if you set splitchart to @, the username is sent in the format
of imsiinfo@sninfo@username.
Examples
# Configure the separator for the username as imsiinfo#sninfo#username.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1]ppp user attach-format imsi-sn split #
ppp user replace
Use ppp user replace to replace the username with IMSI or SN information for authentication during
negotiation.
Use undo ppp user replace imsi to remove the replacement.
Syntax
ppp user replace { imsi | sn }
undo ppp user replace imsi
Default
The username is used for authentication.
Views
VT interface view