R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

103
Views
L2TP group view
Default command level
2: System level
Examples
# Enable the L2TP tunnel flow control function.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel flow-control
tunnel name
Use tunnel name to specify the name of a tunnel at the local end.
Use undo tunnel name to restore the default.
Syntax
tunnel name name
undo tunnel name
Default
A tunnel takes the system name of the device as its name at the local end.
Views
L2TP group view
Default command level
2: System level
Parameters
name: Specifies the name for the tunnel at the local end, a case-sensitive string of 1 to 30 characters.
Examples
# Specify the local name for a tunnel as itsme.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel name itsme
Related commands
sysname (Fundamentals Command Reference)
tunnel password
Use tunnel password to specify the key for tunnel authentication.
Use undo tunnel password to remove the configuration.
Syntax
tunnel password { cipher | simple } password