R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

106
HDLC configuration commands
link-protocol hdlc
Use link-protocol hdlc to enable HDLC encapsulation on an interface.
Syntax
link-protocol hdlc
Default
PPP encapsulation is configured on an interface.
Views
Interface view
Default command level
2: System level
Usage guidelines
HDLC can carry the network layer protocols, such as IP.
Related commands
timer hold
Examples
# Enable HDLC encapsulation on interface Serial 2/0/1.
<Sysname> system-view
[Sysname] interface serial 2/0/1
[Sysname-Serial2/0/1] link-protocol hdlc
timer hold
Use timer hold to set the link status polling interval and the link status polling times on an interface.
Use undo timer hold to restore the default.
Syntax
timer hold seconds retries
undo timer hold
Default
The link status polling interval is 10 seconds on an interface. The link status polling times is 5 on an
interface.
Views
Interface view