R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

108
HDLC link bundling configuration commands
bandwidth
Use bandwidth to set the intended bandwidth for a HDLC link bundle interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
HDLC link bundle interface view
Default command level
2: System level
Parameters
bandwidth-value: Specifies the intended bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
You can obtain the intended bandwidth of an interface by using third-party software to query the value
of the MIB ifspeed.
The intended bandwidth of an interface is for the network management system to monitor the interface
bandwidth, and does not affect the actual bandwidth of the interface.
Examples
# Set the intended bandwidth to 1000 kbps for HDLC link bundle interface 1.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1] bandwidth 1000
bundle load-balance
Use bundle load-balance to configure the load balancing mode for an HDLC link bundle interface.
Use undo bundle load-balance to restore the default.
Syntax
bundle load-balance { per-flow | per-packet }
undo bundle load-balance
Default
Per-packet load balancing is used.
Views
HDLC link bundle interface view