R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

111
bundle member-priority
Use bundle member-priority to set the bundling priority for an HDLC-enabled interface.
Use undo bundle member-priority to restore the default.
Syntax
bundle member-priority priority
undo bundle member-priority
Default
The bundling priority of an HDLC-enabled interface is 32768.
Views
Interface view
Default command level
2: System level
Parameters
priority: Bundling priority of an HDLC-enabled interface. The value range for this argument is 1 to 65535.
Usage guidelines
A higher priority value means a lower bundling priority.
Examples
# Set the bundling priority of HDLC-enabled interface POS 5/0/1 to 1.
<Sysname> system-view
[Sysname] interface pos 5/0/1
[Sysname-Pos5/0/1] bundle member-priority 1
bundle min-active bandwidth
Use bundle min-active bandwidth to set the minimum amount of bandwidth required to bring up the
HDLC link bundle.
Use undo bundle min-active bandwidth to remove the limit.
Syntax
bundle min-active bandwidth bandwidth
undo bundle min-active bandwidth
Default
No limit is set on the minimum amount of bandwidth required to bring up an HDLC link bundle.
Views
HDLC link bundle interface view
Default command level
2: System level