R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

115
Table 19 Command output
Field Description
bundle Name of the HDLC link bundle.
slot
Slot number of the interface card for which HDLC link bundling information is
displayed.
max-active links
Limit on the number of selected member interfaces in the HDLC link bundle.
This field will not be displayed if you have not limited the number of selected
member interfaces in the HDLC link bundle.
min-active links
Number of selected member interfaces required to bring up the HDLC link
bundle. This field will not be displayed if you have not set the number of
selected member interfaces required to bring up the HDLC link bundle.
min-active bandwidth
Minimum amount of bandwidth required to bring up the HDLC link bundle.
This field will not be displayed if you have not set the minimum amount of
bandwidth required to bring up the HDLC link bundle.
Selected members Current number of selected member interfaces.
total bandwidth
Total bandwidth of all the selected member interfaces in the HDLC link
bundle.
Member Name of a member interface.
State: S -- Selected, R -- Ready,
N -- Negotiated, I -- Initial
State of a member interface:
• S—Selected (On an interface board, only information about member
interfaces in this state will be displayed).
• R—Ready.
• N—Negotiated.
• I—Initial.
Bandwidth(kbps) Bandwidth (in kbps) of a member interface.
Priority Bundling priority of a member interface.
display interface hdlc-bundle
Use display interface hdlc-bundle to display information about an HDLC link bundle interface.
Syntax
display interface [ hdlc-bundle ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
display interface hdlc-bundle bundle-id [ brief [ description ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bundle-id: Number of an HDLC link bundle. The value range is the same as that specified in the interface
hdlc-bundle command.