R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

117
Link: ADM - administratively down; Stby - standby
Interface Link Cause
HBDL2 DOWN Not connected
Table 20 Command output
Field Description
HDLC-bundle1 current state
Physical state of the HDLC link bundle interface:
• DOWN (Administratively)—The interface is shut
down using the shutdown command.
• DOWN—The interface is administratively up but
physically down.
• UP—The interface is up both administratively and
physically.
Line protocol current state
Link layer protocol state of the HDLC link bundle
interface:
• DOWN—The link layer protocol of the interface is
down, indicating that the HDLC link bundle
probably contains no selected member interface.
• UP—The link layer protocol of the interface is up.
Description Description of the HDLC link bundle interface.
The Maximum Transmit Unit MTU on the HDLC link bundle interface.
Internet Address IP address of the HDLC link bundle interface.
Link layer protocol
Link layer protocol encapsulation on the HDLC link
bundle interface.
Physical is HDLC-BUNDLE
The physical type of the HDLC link bundle interface is
HDLC bundle.
baudrate Baudrate of the HDLC link bundle interface.
Output queue : (Urgent queuing :
Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing :
Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing :
Size/Length/Discards) 0/75/0
Traffic statistics for each output queue on the interface,
including the number of packets in the queue (the
queue size), the maximum number of packets that the
queue can hold (queue length), and the number of
dropped packets.
In the sample output, the output queues on the interface
include an urgent queue, a protocol queue, and a
FIFO queue.
Last clearing of counters
Last time when the statistics for the interface were
cleared. Never indicates that the statistics for the
interface were never cleared.
Last 300 seconds input/output rate
Average incoming/outgoing traffic rate in
Bps/bps/pps on the interface in the last 300 seconds.
packets input/output, bytes, drops
Incoming and outgoing traffic size in packets/bytes
and the number of dropped incoming/outgoing
packets on the interface.
The brief information of interface(s) under route mode Brief information about Layer 3 interfaces.