R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

118
Field Description
Link: ADM - administratively down; Stby - standby
Link status:
• ADM—The interface has been administratively shut
down. To recover its physical state, perform the
undo shutdown command.
• Stby—The interface is operating as a backup
interface. To see the primary interface, use the
display standby state command (High Availability
Command Reference).
Protocol: (s) - spoofing
If the network layer protocol state of an interface is
shown as UP, but its link is an on-demand link or not
present at all, the protocol attribute includes the
spoofing flag (an s in parentheses).
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is up.
• ADM—The link has been administratively shut
down. To recover its physical state, perform the
undo shutdown command.
Protocol Protocol connection state of the interface.
Main IP Main IP address of the interface.
Description Description of the interface.
Cause
Cause of a DOWN physical link. If the port has been
shut down with the shutdown command, this field
displays Administratively. To restore the physical state
of the interface, use the undo shutdown command.
interface hdlc-bundle
Use interface hdlc-bundle to create an HDLC link bundle interface and enter its view. If the HDLC link
bundle interface already exists, you enter HDLC link bundle interface view directly.
Use undo interface hdlc-bundle to remove an HDLC link bundle interface.
Syntax
interface hdlc-bundle bundle-id
undo interface hdlc-bundle bundle-id
Views
System view
Default command level
2: System level
Parameters
bundle-id: Number of an HDLC link bundle interface. The value range for the bundle-id argument is 1 to
12 for HSR6802, 1 to 24 for HSR6804, and 1 to 48 for HSR6808.