R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

119
Examples
# Create HDLC link bundle interface 1 and enter its view.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1]
mtu
Use mtu to set the MTU size for an HDLC link bundle interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU size of an HDLC link bundle interface is 1500 bytes.
Views
HDLC link bundle interface view
Default command level
2: System level
Parameters
size: Specifies the MTU in bytes on an HDLC link bundle interface. The value range for the size argument
is 46 to 2000 for FIP-600 modules, 46 to 9600 For all other interface modules.
Usage guidelines
To forward traffic correctly, make sure the largest MTU supported by the member interface is no less than
the MTU size configured for the HDLC link bundle interface.
Examples
# Set the MTU size of HDLC link bundle interface 1 to 1430 bytes.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1] mtu 1430
reset counters interface
Use reset counters interface to clear the statistics of an HDLC link bundle interface.
Syntax
reset counters interface [ hdlc-bundle [ bundle-id ] ]
Views
User view
Default command level
2: System level