R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

120
Parameters
bundle-id: ID of an HDLC link bundle interface.
Usage guidelines
Before collecting traffic statistics within a specific period of time on an interface, you must clear the
existing statistics.
If you do not specify hdlc-bundle, this command clears the statistics of all interfaces.
If you specify hdlc-bundle but not bundle-id, this command clears the statistics of all HDLC link bundle
interfaces.
If you specify both hdlc-bundle and bundle-id, this command clears the statistics of the specified HDLC
link bundle interface.
Examples
# Clear the statistics of HDLC link bundle interface HDLC-bundle 1.
<Sysname> reset counters interface hdlc-bundle 1
service
Use service to specify a card to process or forward traffic for an HDLC link bundle interface.
Use undo service to restore the default.
Syntax
In standalone mode:
service slot slot-number
undo service slot
In IRF mode:
service chassis chassis-number slot slot-number
undo service chassis
Default
The default varies by whether all member interfaces of the HDLC link bundle interface are on the same
card as follows:
• If all member interfaces of the HDLC link bundle interface are on the same card, the card processes
or forwards traffic for the bundle interface.
• If the member interfaces are on different cards, the card that has the first selected member interface
on the member list processes or forwards traffic for the bundle interface. For the member list of an
HDLC link bundle interface, perform the display bundle member hdlc-bundle command.
Views
HDLC link bundle interface view
Default command level
2: System level
Parameters
slot slot-number: Specifies a card by its slot number. (In standalone mode.)