R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

6
display atm interface
Use display atm interface to display the configuration and status information of the specified ATM
interface, or all ATM interfaces if no ATM interface is specified.
Syntax
display atm interface [ atm interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Specifies an ATM interface to view its configuration and status information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the information interface about ATM 2/0/1.
<Sysname> display atm interface atm 2/0/1
ATM interface Atm2/0/1, State UP
Port Information:
Maximum VCs: 1024
PVCs: 5, MAPs: 1
input pkts: 11603, input bytes: 426476, input pkt errors: 37092
output pkts: 14053, output bytes: 519106, output pkt errors: 0
Main interface Information:
PVCs: 4, MAPs: 1
input pkts: 11603, input bytes: 426476, input pkt errors: 19210
output pkts: 14053, output bytes: 519106, output pkt errors: 0
ATM interface Atm2/0/1.1, point-to-point, State UP
Sub-interface Information:
PVCs: 1, MAPs: 0
input pkts: 0, input bytes: 0, input pkt errors: 17880
output pkts: 0, output bytes: 0, output pkt errors: 0
Table 2 Command output
Field Description
Maximum VCs Maximum number of VCs allowed on the ATM interface.