R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

125
Field Descri
p
tion
In ARP reply Received ARP replies.
Related commands
fr inarp
display fr interface
Use display fr interface to display information about the specified or all frame relay interfaces.
Syntax
display fr interface [ interface-type { interface-number | interface-number.subnumber } ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type { interface-number | interface-number.subnumber }: Specifies an interface by its type and
number. The interface-number argument is a main interface number. The subnumber argument is a
subinterface number, in the range 0 to 1023.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
You can specify a main interface or a subinterface by providing the interface-type { interface-number |
interface-number.subnumber } argument combination.
Examples
# Display information about all frame relay interfaces.
<Sysname> display fr interface
Serial2/0/0, multi-point, protocol up
Serial2/0/0.1, point-to-point, protocol down
Table 23 Command output
Field Descri
p
tion
Serial2/0/0, multi-point, protocol up Frame relay interface, and its type and link layer state.
Serial2/0/0.1, point-to-point, protocol down Subinterface, and its type and link layer state.