R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

130
Table 26 Command output
Field Descri
p
tion
PVC statistics for interface Serial2/0/0 (DTE, physical
UP)
Display information about PVCs on the frame relay
interface Serial 2/0/0. The interface operates in DTE
mode, and is physically up.
DLCI = 100, USAGE = UNUSED (0000),
Serial2/0/0
DLCI 100 was assigned to the PVC through
negotiation of LMI with DCE end. Its state is unused,
and it belongs to interface Serial 2/0/0.
create time = 2000/04/01 23:55:39, status =
ACTIVE
Date and time creating the PVC and the state of the
PVC.
in BECN = 0, in FECN = 0 Received BECNs and FECNs.
in packets = 0, in bytes = 0 Received frames and bytes.
out packets = 0, out bytes = 0 Sent frames and bytes.
Related commands
fr dlci
display fr statistics
Use display fr statistics to display current frame relay statistics about received and sent packets for the
specified or all main interfaces.
Syntax
display fr statistics [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The specified
interface must be a main interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, the frame relay statistics for all interfaces are displayed.
You can use this command to check frame relay traffic statistics and diagnose problems.