R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

7
Field Description
PVCs Number of PVCs configured on the interface.
MAPs Number of mappings on the interface.
input pkts: 0, input bytes: 0, input pkt errors: 0 Received packets, bytes, and errors.
output pkts: 69, output bytes: 2218, output pkt
errors: 8
Transmitted packets, bytes, and errors.
Sub-interface Information Subinterface information.
display atm map-info
Use display atm map-info to display the PVC mapping information.
Syntax
display atm map-info [ interface interface-type interface-number [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
pvc-name: PVC name, a unique string of 1 to 16 characters on the specified ATM interface,
case-insensitive. The name cannot be the same as any valid VPI/VCI pair. For example, the name 1/20
is not allowed.
vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier, and its value range is 0 to 255. VCI is short
for virtual channel identifier, and its value range varies by interface type. As VCIs from 0 to 31 are
reserved for special purposes, do not use them in normal cases. For more information about the value
range, see Table 3.
Table 3 VCI range for each type of
ATM interface
Interface type VCI
ADSL 2+ 0 to 255
G.SHDSL 0 to 255
ATMOC3 0 to 1023
ATM E1 0 to 511
ATM T1 0 to 511
ATM E3 0 to 1023
ATM T3 0 to 1023
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.