R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

144
Syntax
reset fr pvc interface serial interface-number [ dlci dlci-number ]
Views
User view
Default command level
2: System level
Parameters
interface-number: Interface number.
dlci dlci-number: Specifies the DLCI to be assigned to an FR interface, in the range 16 to 1007. DLCI 0
through 15 and 1008 through 1023 are reserved for special use and are unavailable.
Examples
# Clear PVC statistics on Serial 2/0/0.
<Sysname> reset fr pvc interface serial 2/0/0
shutdown
Use shutdown to disable the current switching PVC.
Use undo shutdown to enable the current switching PVC.
Syntax
shutdown
undo shutdown
Default
The switching PVC is enabled.
Views
Frame relay switching view
Default command level
2: System level
Examples
# Create a PVC named pvc1 on the DCE serving as the switch, which is from the DLCI 100 of Serial
2/0/0 to the DLCI 200 of Serial 2/0/1 and then shut down the PVC.
<Sysname> system-view
[Sysname] fr switching
[Sysname] fr switch pvc1 interface serial 2/0/0 dlci 100 interface serial 2/0/1 dlci 200
[Sysname-fr-switching-pvc1] shutdown
timer hold
Use timer hold to configure the T391 parameter and the times for which the DTE sends status enquiry
messages at the DTE side.
Use undo timer hold to restore the default.