R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

149
Field Descri
p
tion
The brief information of interface(s) under route
mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively down; Stby - standby
Link status:
• ADM—The interface has been administratively shut
down. To recover its physical state, perform the
undo shutdown command.
• Stby—The interface is operating as a backup
interface. To see the primary interface, use the
display standby state command (High Availability
Command Reference).
Protocol: (s) - spoofing
If the network layer protocol state of an interface is
shown as UP, but its link is an on-demand link or not
present at all, its protocol attribute includes the
spoofing flag (an s in parentheses).
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is up.
• ADM—The link has been administratively shut
down. To recover its physical state, perform the
undo shutdown command.
Protocol Protocol connection state of the interface.
Main IP Main IP address of the interface.
Description Description of the interface.
Cause
Cause of a DOWN physical link. If the port has been
shut down with the shutdown command, this field
displays Administratively. To restore the physical state
of the interface, use the undo shutdown command.
display mfr
Use display mfr to display configuration and statistics information of the specified multilink frame relay
bundle and bundle link.
Syntax
display mfr [ interface interface-type interface-number | verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The specified
interface must be a main interface.