R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

151
# Display detailed state information about all frame relay bundle links.
<Sysname> display mfr verbose
Bundle interface:MFR1/0/0, Bundle state = up, Bundle class = A,
fragment enabled, MFR bundle fragment size = 222
original packet be assembled/fragmentized (in/out): 0/0
droped fragment (in/out): 0/0
Bundle name = 2
Bundle links:
Serial2/0/0 LID : Serial2/0/0 Peer LID: Serial2/0/0
Bound to MFR1/0/0 (BID:2)
Physical state: up, link state: up,
Bundle Link statistics:
Hello(TX/RX): 10/10 Hello_ack(TX/RX): 10/10
Add_link(TX/RX): 4/2 Add_link_ack(TX/RX): 2/1
Add_link_rej(TX/RX): 0/0
Remove_link(TX/RX): 0/0 Remove_link_ack(TX/RX): 0/0
Pkts dropped(in/out): 0/0
Timer: ACK 4, Hello 10
Retry: Max 2, Current 0
Cause code: none
Bundle Link fragment statistics:
Mfr fragment(in/out): 0/0
Table 30 Command output
Field Descri
p
tion
LID
Identifier of the bundle link (the name of the physical
interface by default).
Peer LID
Identifier of the peer bundle link (the name of the
physical interface by default).
Bound to MFR1/0/0(BID:2) The bundle link is bound to MFR 1/0/0 with the BID 2.
Physical state Operating state of the physical interface.
link state Operating state of the link protocol on the bundle link.
Bundle Link statistics: Statistics about the packets on the bundle link.
Hello(TX/RX)
Number of the sent and received Hello messages.
Hello messages are sent for maintaining link state.
Hello_ack(TX/RX)
Number of sent and received Hello acknowledgement
messages.
Hello_ack messages notify receipt of the Hello
messages.
Add_link(TX/RX)
Number of sent and received Add_link messages.
Add_link messages notify the peer that the local node
is ready for processing frames.