R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

153
Views
System view
Default command level
2: System level
Parameters
interface-number: MFR interface number.
interface-number.subnumber: MFR subinterface number, of which, interface-number is the main interface
number, and subnumber is the subinterface number, which is in the range of 1 to 1023.
p2mp: Point-to-multipoint subinterface.
p2p: Point-to-point subinterface.
Usage guidelines
To create an MFR subinterface successfully, make sure the MFR interface already exists.
To use the undo interface mfr command to delete an MFR interface, delete all physical interfaces from the
MFR interface.
An MFR interface with one or more bundle links in the up state is physically up. It is down when all bundle
links are physically down. The link layer protocol of an MFR interface is determined by LMI packet
negotiation.
Examples
# Create a multilink frame relay bundle interface MFR 4/0/0 with a point-to-multipoint subinterface.
<Sysname> system-view
[Sysname] interface mfr 4/0/0
[Sysname-MFR4/0/0] quit
[Sysname] interface mfr 4/0/0.1
[Sysname-MFR4/0/0.1]
link-protocol fr mfr
Use link-protocol fr mfr to configure the current physical interface as an MFR bundle link and bind it to
an MFR interface.
Syntax
link-protocol fr mfr interface-number
Default
An interface is not bound to any MFR interface.
Views
Interface view
Default command level
2: System level
Parameters
interface-number: MFR interface number.