R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

157
Syntax
mfr retry number
undo mfr retry
Default
The maximum retry times for which a frame relay bundle link can resend hello message is twice.
Views
Frame relay interface view
Default command level
2: System level
Parameters
number: Maximum retry times for which a bundle link can resend hello messages, in the range 1 to 5.
Usage guidelines
The bundle link sustains link status by periodically sending hello message to the peer end. When the
maximum is reached, if the bundle link still receives no acknowledgement from the peer, the system
regards the link protocol on the bundle link as malfunctioning.
Before configuring this command, make sure you have used the link-protocol fr mfr command to
associate the frame relay bundle link interface with a frame relay bundle.
Examples
# Configure the bundle link Serial 2/0/0 to resend hello message for 3 times at most.
<Sysname> system-view
[Sysname] interface serial 2/0/0
[Sysname-Serial2/0/0] link-protocol fr mfr 4/0/0
[Sysname-Serial2/0/0] mfr retry 3
mfr timer ack
Use mfr timer ack to set the time of waiting for hello acknowledgment message before frame relay
bundle link resends hello message.
Use undo mfr timer ack to restore the default.
Syntax
mfr timer ack seconds
undo mfr timer ack
Default
Time of waiting for hello acknowledgment message before resending hello message is 4 seconds.
Views
Frame relay interface view
Default command level
2: System level