R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

160
Usage guidelines
To collect statistics spanning a specific period for an interface, you must clear statistics of the interface
before starting statistics collection.
• If you do not specify mfr, this command clears the statistics of all interfaces.
• If you specify the mfr but not an interface number, this command clears the statistics of all MFR
interfaces.
• If you specify both mfr and an interface number, this command clears the statistics of the specified
MFR interface.
Examples
# Clear statistics of interface MFR 4/0/0.
<Sysname> reset counters interface mfr 4/0/0
sub-interface rate-statistic
Use sub-interface rate-statistic to enable sub-interface rate statistics collection on the MFR interface.
Use undo sub-interface rate-statistic to disable sub-interface rate statistics collection on the MFR
interface.
Syntax
sub-interface rate-statistic
undo sub-interface rate-statistic
Default
Sub-interface rate statistics collecting is disabled on an MFR interface.
Views
MFR interface view
Default command level
2: System level
Usage guidelines
Use this feature cautiously, because it is system resource demanding.
Examples
# Enable sub-interface rate collection on MFR interface MFR 4/0/0.
<Sysname> system-view
[Sysname] interface mfr 4/0/0
[Sysname-MFR4/0/0] sub-interface rate-statistic