R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

11
# Display information about a specified ATM PVC.
<Sysname> display atm pvc-info interface atm 2/0/1 pvc 1/100
Atm2/0/1, VPI: 1, VCI: 100, INDEX: 0
AAL5 Encaps: SNAP, Protocol: IP
Service-type: CBR, output-pcr: 200 kbps, CDVT: 500 us
Transmit-Priority: 0
OAM interval: 0 sec(disabled), OAM retry interval: 1 sec
OAM retry count (up/down): 3/5
OAM ais-rdi count (up/down): 3/1
input pkts: 0, input bytes: 0, input pkt errors: 0
output pkts: 0, output bytes: 0, output pkt errors: 0
Interface State: UP, OAM State: UP, PVC State: UP
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
OAM cells received: 42
F5 InEndloop: 0, F5 InAIS: 42, F5 InRDI: 0
OAM cells sent: 0
F5 OutEndloop: 0
OAM cell drops: 0
OAM CC State: No CC Alarm
Table 7 Command output
Field Descri
p
tion
VPI Virtual path identifier of the specified ATM PVC.
VCI Virtual channel identifier of the specified ATM PVC.
INDEX Internal index of the PVC.
AAL5 Encaps AAL5 encapsulation type of the PVC.
Protocol Upper layer protocol running on the PVC.
Service-type Service type.
Transmit-Priority Transmit priority.
OAM interval Interval at which OAM F5 loopback cells are sent.
OAM retry interval Interval at which the system retransmits OAM F5 loopback cells.
OAM retry count Number of OAM cells transmitted before a PVC is declared up or down.
OAM ais-rdi count
Number of OAM AIS/RDI cells for the device to receive before reporting that the
PVC is down. Number of seconds for the device to wait before reporting that the
PVC is up after the PVC has stopped receiving OAM AIS/RDI cells.
input pkts: Count of received packets.
input bytes: Count of received bytes.
input pkt errors: Count of received error packets.
output pkts Count of transmitted packets.
output bytes Count of transmitted bytes.
output pkt errors Count of transmitted error packets.