R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

12
Field Descri
p
tion
Interface State Link layer protocol status of the interface.
PVC State PVC status.
Output queue Information about each output queue on the PVC.
OAM cells received Count of received OAM cells.
F5 InEndloop Count of received F5 loopback cells.
F5 InAIS
Count of received AIS cells.
If the AIS alarm state is not supported, this command displays only the count of
AIS cells, not the AIS alarm state, which is the OAM AIS State field.
F5 InRDI
Count of received RDI cells.
If the RDI alarm state is not supported, this command displays only the count of
RDI cells, not the RDI alarm state, which is the OAM RDI State field.
OAM cells sent Count of transmitted OAM cells.
F5 OutEndloop Count of transmitted F5 loopback cells.
OAM AIS State
AID alarm state.
If the AIS alarm state is supported, this command displays only the AIS alarm
state, not the count of received AIS cells, which is the F5 InAIS field.
OAM RDI State
If the RDI alarm state is supported, this command displays only the RDI alarm
state, not the count of received RDI cells, which is the F5 InRDI field.
OAM cell drops Count of dropped OAM cells.
OAM CC State
OAM CC alarm state:
• A dash (–)—The system does not support obtaining OAM CC state.
• No CC Alarm—No OAM CC alarm is present.
• E2E CC Alarm—An end-to-end OAM CC alarm is present.
• SEG CC Alarm—A segment OAM CC alarm is present (not supported).
display interface virtual-ethernet
Use display interface virtual-ethernet to display information about Layer 3 VE interfaces.
Syntax
display interface [ virtual-ethernet ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
display interface virtual-ethernet interface-number [ brief [ description ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Layer 3 VE interface number.