R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

27
Before creating a PVC group, make sure the corresponding PVC exists.
The encapsulation command and the oam-related commands are not applicable to secondary PVCs. The
configurations corresponding to these commands on the primary PVC of a PVC group apply to all the
secondary PVCs in the PVC group.
Examples
# Create a PVC group named aa, with the primary PVC being the PVC with the VPI/VCI value of 1/32.
<Sysname> system-view
[Sysname] interface atm 1/0/1
[Sysname-Atm1/0/1] pvc aa 1/32
[Sysname-atm-pvc-Atm1/0/1-1/32-aa] quit
[Sysname-Atm1/0/1] pvc-group aa 1/32
Related commands
• ip-precedence
• pvc
pvc max-number
Use pvc max-number to set the maximum number of PVCs allowed on an ATM interface.
Use undo pvc max-number to restore the default.
Syntax
pvc max-number max-number
undo pvc max-number
Views
ATM main interface view
Default command level
2: System level
Parameters
max-number: Maximum number of PVCs allowed on the ATM interface. The value range varies by the
type of physical interface, as shown in Table 9.
Table 9 Maximum nu
mber of PVCs supported on ATM interfaces
Interface type Maximum number Default
ADSL 1 to 32 32
GSHDSL 1 to 32 32
ATM OC3 1 to 1024 1024
ATM25 1 to 256 256
ATM E3 1 to 1024 1024
ATM T3 1 to 1024 1024
Usage guidelines
The maximum number of PVCs allowed varies with interface type.