R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

29
• service vbr-rt
• service ubr
remark atm-clp
Use remark atm-clp to configure the action of setting the CLP bit for ATM cells for the traffic behavior.
Use undo remark atm-clp to cancel the action.
Syntax
remark [ green | red | yellow ] atm-clp atm-clp-value
undo remark atm-clp
Default
The action of marking the CLP flag bit of ATM cells is not configured.
Views
Traffic behavior view
Default command level
2: System level
Parameters
green: Sets the CLP bit for green packets.
red: Sets the CLP bit for red packets.
yellow: Sets the CLP bit for yellow packets.
atm-clp-value: Specifies the value of the CLP bit in an ATM cell. The value of this argument is 0 or 1. When
congestion occurs, ATM cells with CLP 1 are dropped preferentially.
Usage guidelines
A QoS policy that references the behavior can be applied only to the outgoing traffic of an ATM PVC.
For more information about green, red, and yellow packets, see ACL and QoS Configuration Guide.
Examples
# Create a traffic behavior named database and configure the action of setting the CLP bit of ATM cells
to 1 for the traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark atm-clp 1
reset counters interface virtual-ethernet
Use reset counters interface virtual-ethernet to clear the statistics of Layer 3 VE interfaces.
Syntax
reset counters interface [ virtual-ethernet [ interface-number ] ]
Views
User view