R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

32
Default command level
2: System level
Parameters
output-pcr: Specifies the output peak rate of an ATM cell (in kbps). For more information about the value
range, see Table 10.
Usage guidelines
Use this command and the service vbr-nrt, service vbr-rt, and service cbr commands to set the PVC
service type and rate-related parameters. A newly set service type overwrites the previous one.
Examples
# Create a PVC named aa with the VPI/VCI value of 1/101.
<Sysname> system-view
[Sysname] interface atm 1/0/1
[Sysname-Atm1/0/1] pvc aa 1/101
# Specify the service type of the PVC as UBR and the peak cell rate of ATM cell as 100000 kbps.
[Sysname-atm-pvc-Atm1/0/1-1/101-aa] service ubr 100000
Related commands
• service vbr-nrt
• service vbr-rt
• service cbr
service vbr-nrt
Use service vbr-nrt to specify the service type of PVC as NRT-VBR and specify the related rate
parameters.
Use undo service to restore the default.
Syntax
service vbr-nrt output-pcr output-scr output-mbs
undo service
Default
The service type is UBR after a PVC is created.
Views
PVC view, ATM class view
Default command level
2: System level
Parameters
output-pcr: Specifies the peak rate of ATM cell output (in kbps). For more information about the value
range, see Table 10.
output
-scr: Specifies the sustainable rate of ATM cell output (in kbps). Its value ranges are the same as
those of the output-pcr argument.