R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

54
If you specify the mp-group keyword without the mp-number argument, this command displays
information about all existing MP-group interfaces.
Examples
# Display detailed information about interface MP-group 12.
<Sysname> display interface mp-group 12
Mp-group12 current state: DOWN
Line protocol current state: DOWN
Description: Mp-group12 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet protocol processing : disabled
Link layer protocol is PPP
LCP initial
Physical is MP
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
Last 300 seconds input: 0 bytes/sec 0 packets/sec
Last 300 seconds output: 0 bytes/sec 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
# Display brief information about interface MP-group12.
<Sysname> display interface mp-group 12 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
MP12 DOWN DOWN --
# Display brief information about all MP-group interfaces in DOWN state.
<Sysname> display interface mp-group brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
MP1 ADM Administratively
MP12 DOWN Not connected
Table 11 Command output
Field Descri
p
tion
current state
Physical state of the interface:
• DOWN (Administratively)—The interface was shut down with the
shutdown command, that is, is administratively down.
• DOWN—The interface is administratively up but physically down.
• UP—The interface is both administratively and physically up.
Line protocol current state Data link layer state (UP or DOWN).
Description Description string of the interface.
The Maximum Transmit Unit MTU of the interface.