R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

59
Field Description
0 lost fragments Number of the lost fragments.
0 reordered Number of the packets reassembled.
0 unassigned Number of the packets waiting for being reassembled.
0 interleaved Number of the interleaved packets.
sequence 0/0 rcvd/sent Received sequence number/sent sequence number.
The member channels bundled are
The following displays all the member channels bound in this
logical channel.
Serial2/0/1:15 Up-Time:2005/03/13
19:54:23:60
Subchannel Serial2/0/1:15 is up at 19:54:23:60 on March
13, 2005.
Inactive member channels List of the inactive subchannels.
Related commands
• link-protocol ppp
• ppp mp
display virtual-access
Use display virtual-access to display the information about a VA interface or the VA interfaces that are
formed based on a VT.
Syntax
In standalone mode:
display virtual-access [ va-number | peer peer-address | slot slot-number | user user-name | vt
vt-number ] * [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display virtual-access [ va-number | peer peer-address | chassis chassis-number slot slot-number | user
user-name | vt vt-number ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
va-number: VA interface number, ranging from 0 to 65535.
peer peer-address: Specifies the peer IP address of a VA interface, in dotted decimal notation.
slot slot-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the IRF member ID, and the slot-number argument represents the slot number of the
card. (In IRF mode.)
user user-name: Specifies the username of a user logging in through a VA interface. This argument is a
string of 1 to 80 characters.