R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

72
Syntax
display ppp compression iphc rtp [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
When IPHC RTP applies to MP links, the associated VA interfaces perform the compression. You can
check the compression information on MP templates, such as VT or dialer interfaces.
When IPHC RTP applies to normal PPP links, physical interfaces perform the compression. You can check
the compression information on the physical interfaces.
Examples
# Display IPHC RTP header compression statistics.
<Sysname> display ppp compression iphc rtp
IPHC: TCP/IP header compression
Interface: Serial2/0
Received:
Compress/Error/Discard/Total: 0/0/0/0 (Packets)
Sent:
Compress/Total: 0/0 (Packets)
Send/Save/Total: 0/0/0 (Bytes)
Connect:
Rx/Tx: 16/16
Long-search/Miss: 0/0
Table 13 Command output
Field Descri
p
tion
Received Statistics on received packets.
Compress/Error/Discard/Total: 0/0/0/0 (Packets)
The number of received
compressed/error/discarded/total packets is
0/0/0/0.
Sent Statistics on sent packets.