R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

73
Field Descri
p
tion
Compress/Total: 0/0 (Packets)
Send/Save/Total: 0/0/0 (Bytes)
The number of sent compressed/total packets is 0/0.
The bytes of sent/saved/total packets are 0/0/0.
Connect: Number of connections.
Rx
Number of connections that the receiver can
decompress.
Tx Number of connections that the sender can compress.
Long-search/Miss
Times of searching compression entries and times of
search failures.
display ppp compression iphc tcp
Use display ppp compression iphc tcp to display IPHC TCP header compression statistics.
Syntax
display ppp compression iphc tcp [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
When IPHC TCP applies to MP links, the associated VA interfaces perform the compression. You can
check the compression information on MP templates, such as VT or dialer interfaces.
When IPHC TCP applies to normal PPP links, physical interfaces perform the compression. You can check
the compression information on the physical interfaces.
Examples
# Display IPHC TCP header compression statistics.
<Sysname> display ppp compression iphc tcp
IPHC: TCP/IP header compression
Interface: Serial2/0
Received:
Compress/Error/Discard/Total: 0/0/0/0 (Packets)