R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

74
Sent:
Compress/Total: 0/0 (Packets)
Send/Save/Total: 0/0/0 (Bytes)
Connect:
Rx/Tx: 16/16
Long-search/Miss: 0/0
Table 14 Command output
Field Descri
p
tion
Received Statistics on received packets.
Compress/Error/Discard/Total: 0/0/0/0 (Packets)
The number of received
compressed/error/discarded/total packets is
0/0/0/0.
Sent Statistics on sent packets.
Compress/Total: 0/0 (Packets)
Send/Save/Total: 0/0/0 (Bytes)
The number of sent compressed/total packets is
0/0.
The bytes of sent/saved/total packets are
0/0/0.
Connect: Number of connections.
Rx
Number of connections that the receiver can
decompress.
Tx
Number of connections that the sender can
compress.
Long-search/Miss
Times of searching compression entries and
times of search failures.
ppp mp lfi
Use ppp mp lfi to enable LFI on an interface.
Use undo ppp mp lfi to disable LFI.
Syntax
ppp mp lfi
undo ppp mp lfi
Default
LFI is disabled.
Views
Virtual template interface view, MP-group interface view
Default command level
2: System level
Usage guidelines
Disabling LFI also removes the user-configured settings of maximum LFI fragment delay and size.