R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

82
Views
System view
Default command level
2: System level
Parameters
number: Upper threshold for the PPPoE abnormal offline event percentage, in the range of 0 to 100.
Usage guidelines
If the PPPoE abnormal offline event percentage in the last five minutes exceeds this threshold, the system
outputs a trap message.
PPPoE abnormal offline event percentage = 100 x Abnormal offline event count/(Abnormal offline event
count + Normal offline event count).
Examples
# Set the upper threshold for the PPPoE abnormal offline event percentage to 10.
<Sysname> system-view
[Sysname] pppoe-server abnormal-offline-percent threshold 10
Related commands
pppoe-server normal-offline-percent threshold
pppoe-server bind
Use pppoe-server bind to enable PPPoE on an Ethernet interface and bind the Ethernet interface to a
virtual-template interface.
Use undo pppoe-server bind to disable PPPoE on an Ethernet interface.
Syntax
pppoe-server bind virtual-template number
undo pppoe-server bind
Default
PPPoE is disabled.
Views
Interface view
Default command level
2: System level
Parameters
virtual template number: Specifies a virtual-template interface number, in the range of 0 to 1023.
Examples
# Enable PPPoE on interface GigabitEthernet 1/0/1 and bind the Ethernet interface to Virtual-template
1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] pppoe-server bind virtual-template 1