R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

85
undo pppoe-server max-sessions slot slot-number
In IRF mode:
pppoe-server max-sessions chassis chassis-number slot slot-number total number
undo pppoe-server max-sessions chassis chassis-number slot slot-number
Default
The maximum number of PPPoE sessions allowed varies by device.
Views
System view
Default command level
2: System level
Parameters
slot slot-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the IRF member ID, and the slot-number argument represents the slot number of the
card. (In IRF mode.)
number: Maximum number of PPPoE sessions allowed. The value range for the number argument is 1 to
65535
Examples
In standalone mode:
# Set the maximum number of PPPoE sessions supported on card 3 to 1500.
<Sysname> system-view
[Sysname] pppoe-server max-sessions slot 3 total 1500
In IRF mode:
# Set the maximum number of PPPoE sessions to 1500 for card 3 on IRF member device 2.
<Sysname> system-view
[Sysname] pppoe-server max-sessions chassis 2 slot 3 total 1500
pppoe-server normal-offline-percent threshold
Use pppoe-server normal-offline-percent threshold to set the lower threshold for the PPPoE normal offline
event percentage.
Use undo pppoe-server normal-offline-percent threshold to restore the default.
Syntax
pppoe-server normal-offline-percent threshold number
undo pppoe-server normal-offline-percent threshold
Default
The lower threshold for the PPPoE normal offline event percentage is 0.
Views
System view