R3303-HP HSR6800 Routers Layer 2 - WAN Command Reference

86
Default command level
2: System level
Parameters
number: Lower threshold for the PPPoE normal offline event percentage, in the range of 0 to 100.
Usage guidelines
If the PPPoE normal offline event percentage in the last five minutes is lower than this threshold, the system
outputs a trap message.
PPPoE normal offline event percentage = 100 – PPPoE abnormal offline event percentage.
Examples
# Set the lower threshold for the PPPoE normal offline event percentage to 10.
<Sysname> system-view
[Sysname] pppoe-server normal-offline-percent threshold 10
Related commands
pppoe-server abnormal-offline-percent threshold
reset pppoe-server
Use reset pppoe-server to terminate a PPPoE session on the PPPoE server side.
Syntax
reset pppoe-server { all | interface interface-type interface-number | virtual-template number }
Views
User view
Default command level
2: System level
Parameters
all: Terminates all the PPPoE sessions.
interface interface-type interface-number: Specifies a port by its type and number.
virtual-template number: Specifies a virtual template interface by its number in the range of 0 to 1023.
Examples
# Terminate the session established based on Virtual-template 1 interface on the PPPoE server side.
<Sysname> reset pppoe-server virtual-template 1