R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

88
Authentication Sequence: [ 0 ]
Neighbor state change count: 6
LDP-sync Adjacency state: Up
Table 21 Command output
Field Descri
p
tion
Area areaID interface
IPAddress(InterfaceName)'s neighbors
Neighbor information of the interface in the specified area:
• areaID—Area to which the neighbor belongs.
• IPAddress—Interface IP address.
• InterfaceName—Interface name.
interface Interface attached with the neighbor.
Router ID Neighbor router ID.
Address Neighbor router address.
GR State GR state.
State
Neighbor state:
• Down—Initial state of a neighbor conversation.
• Init—The router has seen a Hello packet from the
neighbor. However, the router has not established.
bidirectional communication with the neighbor (the
router itself did not appear in the neighbor's hello
packet).
• Attempt—Available only in an NBMA network, Under
this state, the OSPF router has not received any
information from a neighbor for a period but can send
Hello packets at a longer interval to keep neighbor
relationship.
• 2-Way—Communication between the two routers is
bidirectional. The router itself appears in the
neighbor's Hello packet.
• Exstart—Determines which router is the master and the
initial Database Description (DD) sequence number.
• Exchange—The router is sending DD packets to the
neighbor, describing its entire link-state database.
• Loading—The router sends Link State Request packets
to the neighbor, requesting more recent LSAs.
• Full—The neighboring routers are fully adjacent.
Mode Neighbor mode for LSDB synchronization.
Priority Neighboring router priority.
DR DR on the interface's network segment.
BDR BDR on the interface's network segment.
MTU Interface MTU.
Dead timer due in 33 sec Dead timer times out in 33 seconds.
Neighbor is up for 02:03:35 The neighbor has been up for 02:03:35.
Authentication Sequence Authentication sequence number.
Neighbor state change count Count of neighbor state changes.