R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

89
Field Descri
p
tion
LDP-sync Adjacency state
LDP adjacency state:
• Unknown—The interface has no LDP adjacencies.
• Up—The LDP session to the neighbor has converged.
• Down—The LDP adjacency to the neighbor is down.
# Display brief OSPF neighbor information.
<Sysname> display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbor Brief Information
Area: 0.0.0.0
Router ID Address Pri Dead-Time Interface State
1.1.1.2 1.1.1.2 1 40 GE2/1/1 Full/DR
Table 22 Command output
Field Descri
p
tion
Area Neighbor area.
Router ID Neighbor router ID.
Address Neighbor interface address.
Pri Neighboring router priority.
Dead-Time Dead interval remained.
Interface Interface connected to the neighbor.
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading, Full.
display ospf peer statistics
Use display ospf peer statistics to display OSPF neighbor statistics.
Syntax
display ospf [ process-id ] peer statistics [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.