R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

95
Examples
# Display OSPF virtual link information.
<Sysname> display ospf vlink
OSPF Process 1 with Router ID 3.3.3.3
Virtual Links
Virtual-link Neighbor-ID -> 2.2.2.2, Neighbor-State: Full
Interface: 10.1.2.1 (Serial2/2/0)
Cost: 1562 State: P-2-P Type: Virtual
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
MD5 authentication enabled.
The last key is 3.
The rollover is in progress, 1 neighbor(s) left.
Table 27 Command output
Field Descri
p
tion
Virtual-link Neighbor-ID ID of the neighbor on the virtual link.
Neighbor-State Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, or Full.
Interface IP address and name of the local interface on the virtual link.
Cost Interface route cost.
State Interface state.
Type Type: virtual link.
Transit Area Transit area ID.
Timers Timers: Hello, dead, retransmit, and interface transmission delay.
MD5 authentication enabled Authentication mode.
The last key Most recent MD5 authentication key ID.
neighbor(s) left Number of neighbors that have not completed key rollover.
display router id
Use display router id to display the global router ID.
Syntax
display router id [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.