R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

107
Related commands
default-route-advertise
ispf enable
Use ispf enable to enable OSPF ISPF.
Use undo ispf enable to disable OSPF ISPF.
Syntax
ispf enable
undo ispf enable
Default
OSPF ISPF is disabled.
Views
OSPF view
Default command level
2: System level
Usage guidelines
When a network topology is changed, ISPF recomputes only the affected part of the shortest path tree
(SPT), instead of the entire SPT.
Examples
# Enable OSPF ISPF.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] ispf enable
log-peer-change
Use log-peer-change to enable the logging of OSPF neighbor state changes.
Use undo log-peer-change to disable the logging.
Syntax
log-peer-change
undo log-peer-change
Default
The logging is enabled.
Views
OSPF view
Default command level
2: System level