R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

110
Default
External LSAs in the LSDB are not limited.
Views
OSPF view
Default command level
2: System level
Parameters
number: Specifies the upper limit of external LSAs in the LSDB, in the range of 1 to 1000000.
Examples
# Specify the upper limit of external LSAs as 400000.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] lsdb-overflow-limit 400000
maximum load-balancing (OSPF view)
Use maximum load-balancing to specify the maximum number of equal-cost multi-path (ECMP) routes for
load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing maximum
undo maximum load-balancing
Default
The maximum number of ECMP routes is 8.
Views
OSPF view
Default command level
2: System level
Parameters
maximum: Specifies the maximum number of ECMP routes, in the range of 1 to 8. No ECMP load
balancing is available when the number is set to 1.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] maximum load-balancing 2
network (OSPF area view)
Use network to enable OSPF on the interface attached to the specified network in the area.