R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

120
Usage guidelines
A device that has OSPF NSR enabled cannot act as a GR restarter. The graceful-restart command and
the ospf non-stop-routing command are mutually exclusive and cannot be configured on a device at the
same time.
Examples
# Enable OSPF NSR.
<Sysname> system-view
[Sysname] ospf non-stop-routing
ospf packet-process prioritized-treatment
Use ospf packet-process prioritized-treatment to enable OSPF to give priority to receiving and
processing Hello packets.
Use undo ospf packet-process prioritized-treatment to restore the default.
Syntax
ospf packet-process prioritized-treatment
undo ospf packet-process prioritized-treatment
Default
This function is not enabled.
Views
System view
Default command level
2: System level
Examples
# Enable OSPF to give priority to receiving and processing Hello packets.
<Sysname> system-view
[Sysname] ospf packet-process prioritized-treatment
ospf timer dead
Use ospf timer dead to set the dead interval.
Use undo ospf timer dead to restore the default.
Syntax
ospf timer dead seconds
undo ospf timer dead
Default
The dead interval is four times the hello interval.
Views
Interface view