R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

130
lsdbapproachoverflow: Information about cases approaching LSDB overflow.
lsdboverflow: LSDB overflow information.
maxagelsa: LSA max age information.
nbrstatechange: Neighbor state change information.
originatelsa: Information about LSAs originated locally.
vifauthfail: Virtual interface authentication failure information.
vifcfgerror: Virtual interface configuration error information.
virifauthfail: Virtual interface authentication failure information.
virifrxbadpkt: Information about error packets received by virtual interfaces.
virifstatechange: Virtual interface state change information.
viriftxretransmit: Virtual interface packet retransmission information.
virnbrstatechange: Virtual interface neighbor state change information.
Usage guidelines
For related information, see Network Management and Monitoring Command Reference.
Examples
# Enable the sending of SNMP traps for OSPF process 1.
<Sysname> system-view
[Sysname] snmp-agent trap enable ospf 1
spf-schedule-interval
Use spf-schedule-interval to set the OSPF SPF calculation interval.
Use undo spf-schedule-interval to restore the default.
Syntax
spf-schedule-interval maximum-interval [ minimum-interval [ incremental-interval ] ]
undo spf-schedule-interval
Default
The interval defaults to 5 seconds.
Views
OSPF view
Default command level
2: System level
Parameters
maximum-interval: Specifies the maximum OSPF route calculation interval in seconds, in the range of 1
to 60.
minimum-interval: Specifies the minimum OSPF route calculation interval in milliseconds, in the range of
10 to 60000. The default is 0.