R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

137
Related commands
• bandwidth-reference
• cost-style
bandwidth-reference (IS-IS view)
Use bandwidth-reference to set the bandwidth reference value for automatic link cost calculation.
Use undo bandwidth-reference to restore the default.
Syntax
bandwidth-reference value
undo bandwidth-reference
Default
The bandwidth reference value is 100 Mbps.
Views
IS-IS view
Default command level
2: System level
Parameters
value: Specifies the bandwidth reference value in Mbps, in the range of 1 to 2147483648.
Examples
# Configure the bandwidth reference of IS-IS process 1 as 200 Mbps.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] bandwidth-reference 200
Related commands
auto-cost enable
circuit-cost
Use circuit-cost to set a global IS-IS link cost.
Use undo circuit-cost to restore the default.
Syntax
circuit-cost value [ level-1 | level-2 ]
undo circuit-cost [ level-1 | level-2 ]
Default
No global link cost is configured.
Views
IS-IS view