R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

146
IPv6 Global Address(es) :
Csnp Timer Value : L1 10 L2 10
Hello Timer Value : 10
Hello Multiplier Value : 3
Lsp Timer Value : L12 33
Lsp Transmit-Throttle Count : L12 5
Cost : L1 10 L2 10
Priority : L1 64 L2 64
Retransmit Timer Value : L12 5
BFD : Disabled
Tunnel L1 State : OFF
Tunnel L2 State : ON
Tunnel Type : AA
Tunnel Metric : 0
Destination Router ID : 5.5.5.5
IPv4-Unicast :
Basic-V4 L1 cost: 27 L2 cost: 23 Enable
Voice L1 cost: 20 L2 cost: 29 Disable
IPv6-Unicast :
L1 cost: 10 L2 cost: 30 Enable
LDP-sync : Enabled
Hold Down Time : L12 33
Max Cost Time : L12 22
LDP-sync State : L12 Init
Table 31 Command output
Field Descri
p
tion
Interface Interface type and number.
Id Circuit ID.
IPV4.State IPv4 state.
IPV6.State IPv6 state.
MTU Interface MTU.
Type Interface link adjacency type.
DIS Whether the interface is elected as the DIS or not.
SNPA Address Subnet access point address.
IP Address Primary IP address.
Secondary IP Address(es) Secondary IP addresses.
IPV6 Link Local Address IPv6 link local address.
IPV6 Global Address(es) IPv6 global address.
Csnp Timer Value Interval for sending CSNP packets.
Hello Timer Value Interval for sending Hello packets.
Hello Multiplier Value Number of invalid Hello packets.
Lsp Timer Value Minimum interval for sending LSP packets.